Well, I came in here and noticed my m5 nut had come out of the Z on the right side so no wonder those numbers were that bad (this has been an issue with this printer from day one even with brand new parts printed for it),

Here is my real matrix (more like what I am used to seeing too):

Bed Height Topography:
+1.27089 +0.60914 --0.06336 --0.69936
+1.00064 +0.39539 --0.22661 --0.81211
+0.74964 +0.20364 --0.37411 --0.91611
+0.46789 --0.03111 --0.55411 --1.02036