Results 1 to 10 of 112
Thread: Auto Bed Levelling Glitches
Threaded View
-
12-08-2014, 12:03 PM #29
I looked into this a bit. Apparently the Arduino IDE doesn't give you the flexibility to tailor the avrdude command line. At least not until Arduino v1.5. I did see a forum post mentioning how the avrdude commands could be modified in the <arduino folder>/hardware/arduino/avr/platform.txt file, but you have to be at v1.5 or higher on the IDE to have that file.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion