Results 1 to 6 of 6
Threaded View
-
12-02-2014, 03:32 PM #1
- Join Date
- Sep 2014
- Posts
- 19
Constant Nozzle Clogging / no filament feeding
Hi hope you can help.
I have a FF Creator X , i used mostly the right nozzle with no issue, lately when i used the left nozzle is very common the filament is not feeded or get caugth on the bearings and some times clogging, I though it was the pulley (worn) I change it but no luck.
I use the same temp and speed for the right nozzle and try change them for the left but no luck
any advice? thanks.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion