Results 1 to 10 of 107
Threaded View
-
11-26-2014, 03:48 AM #11
- Join Date
- Oct 2014
- Location
- East Sussex, UK
- Posts
- 14
Maybe between us we can come up with a solution - if time ever allows! A good read here: http://tinyurl.com/prr48wy regarding extruder forces, seem to be in the 1 to 3Kg range.
I have one of the Airtripper extruders for a 3D project I started a while back and hope to finish one day (this is as far as I got: http://tinyurl.com/ouzpgba ) but two house moves and two more to come next year have put that project on hold. I recently bought the FFCP as a stop-gap as needed parts for my main project (http://www.cine2digits.co.uk/). It was for this project I discovered that a thin white ABS layer (0.4 to 0.6) makes for a good diffuser with performance not to dissimilar to expensive, and soon to become extinct, flashed opal glass. The problem of the head(s) dragging across the surface is not tolerable for this application!
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery