Results 1 to 10 of 255
Threaded View
-
11-12-2014, 11:33 PM #11
- Join Date
- Jun 2014
- Location
- Dearborn, MI
- Posts
- 23
I got the 10" i3v with the relay and it only takes about 4 minutes for the hotend and between 10 - 15 (110) minutes for the bed. I take the hotbed to about 106 because the bed struggles to keep a 110 temp. If you have any air blowing over these parts, they will take a lot longer to heat up.
Last edited by RaySuave; 11-12-2014 at 11:41 PM.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion