Results 1 to 10 of 91
Threaded View
-
11-12-2014, 03:43 PM #11
ALRIGHTY THEN got it working,..... unplugged it and plugged in back in. but now the board fine playing a really loud beep because there is the error on screen. so there is still the error :MINTEMP on the board now, any other suggestions? :/
The deeping is coming from the LDC shield
connected it to pronterface and came with this:
*******************************
*******************************
Error:0
[ERROR] Error:0
: Extruder switched off. MINTEMP triggered !
Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)
[ERROR] Error:Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)
echo:SD init failLast edited by jakers181008; 11-12-2014 at 03:46 PM. Reason: added pronter face
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion