Results 1 to 10 of 11
Threaded View
-
12-15-2013, 09:50 PM #1
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
painting and finishing your model
wanted to share something i modeled and printed recently. this was done in all abs. it was too big to be printed on my m2 in one shot so i had split the model in two, printed it then solvent bonded the pieces together. i do alot of automotive painting and airbrushing so i decided to put a nice finish on this piece. i rough sanded it smooth then did a few coats of a high build urethane primer on it. i sanded it smooth. i mixed a light bronze shade of basecoat then took an airbrush and distressed. once it was all done i mixed up some matte automotive clearcoat and put 2 coats on it.
http://www.thingiverse.com/thing:178538
IMG_2288.jpgIMG_2289.jpgIMG_2287.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion