Results 1 to 10 of 40
Threaded View
-
10-21-2014, 07:02 AM #32
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Good drawings of the ins and outs from Google groups.
The first is (I think) what you want. The second is similar to what I now have but my PTFE tube stops about 20 mm up. My original heat tubes had no PTFE and had no thread at the top. I made my heat tubes from 6mm stainless threaded bar so I had threads all the way up instead of it being plain where it went into the aluminium mount so I now have nuts top and bottom like picture 3.
Simple hotend.jpgSimple hotend2.jpgHB_TB_003.jpgLast edited by Mjolinor; 10-21-2014 at 07:09 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion