Results 1 to 4 of 4
Threaded View
-
10-03-2014, 10:55 PM #1
- Join Date
- Oct 2014
- Posts
- 2
Flashforge Dreamer - overhang issues
Hi guys I'm a newbie with a Dreamer
Im trying to print this --> http://www.thingiverse.com/thing:243278/#files
Using Skeinforge. Platform set to 60, extruder to 215, layer height 0.20mm, number of shells 3, fill density 35, fill patter: line, print speed 100mm/s, travel speed 120mm/s, overhang treshold 45.
Right side of all parts on overhangs is curling up. What am I doing wrong ? Im new to 3d printing and any feedback will be highly appreciated
20141003_232924.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion