Results 1 to 10 of 14
Threaded View
-
09-30-2014, 11:05 AM #12
I went to Home Depot and bought a 6 pack of 12'x12' mirrors for $12.00 and a glass cutting wheel. Then, like dacb; I scored and snapped them down to 10"x10" and trimmed the corners by scoring and snapping with pliers. Then sanded down the snapped edges with 220 sandpaper.
I noticed with the mirrors that my actual bed temperature (measured with Fluke laser thermometer) is 10 degrees C less than what I ask for. Set for 110C but measure 100C. Not sure if this is the same for glass but thought I should note it.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help