Results 1 to 10 of 76
Thread: Auto Bed Leveling troubles
Threaded View
-
09-20-2014, 01:12 AM #16
- Join Date
- Sep 2014
- Location
- Deer Park, TX
- Posts
- 62
Increasing the skirt did help with extrusion. But the nozzle is sitting approximately 1.45mm above the bed when printing starts. Ive changed the Z_PROBE_OFFSET but the nozzle stays the same distance.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion