Results 1 to 10 of 12
Thread: Creator X died...
Threaded View
-
09-19-2014, 09:27 AM #1
- Join Date
- Jul 2014
- Posts
- 14
Creator X died...
Well, my Creator X gave up the ghost...and she died. I have only had the machine for 6 months.
I was having an issue where my extruder was not moving in the x axis (it was just grinding). I narrowed it down to an overheating issue and the small fan underneath the machine that cools the board failed. Flashforge support sent me a new fan and everything seemd to be working for about 3 hours...then the machine completely died. Seemed to be getting no power at all.
I tried turning it off/on multiple times with no power (no lights, no display screen...nada damm thing). I did notice though that when the machine was switched to on...when i manually moved the buld plate up/down, the screen would briefly flicker on/off on the display but it only flicker...so some power is getting through.
Anyone have any ideas what the problem could be? Possible failure in the power supply?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion