Results 1 to 10 of 27
Threaded View
-
09-14-2014, 11:58 PM #8
- Join Date
- Jul 2014
- Location
- Munich
- Posts
- 45
so not much news but i solved my picture issue
I closed the cabelings and connected the heater and thermistor of the hotend for testing the nozzle I´ll install after calibration of the extruder.
So plan for the day is to check all functions again ( I changed the pololu voltage a bit) and start calibration.
After installing the nozzle and maybe heat up the first time with Filament.
IMG_8201.jpgIMG_8205.jpg
br
thomas
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion