Results 1 to 9 of 9
Threaded View
-
09-02-2014, 04:53 AM #1
- Join Date
- Jun 2014
- Posts
- 63
extruder clicking / not extruding some lines.
this happen when i used a new filament batch.
symtoms :
see attach, skip lines, more skips on higher layers.
too much clicking, sometimes 2-3 every few seconds. sometimes 2-3 clicks every 10-15secs.
small / debris / grinds on extruder mount, some on platform.
what i have done :
adjust filament size, measured actual, set average diameter + 1mm
adjust temperature, increase to 240 from 225-230.
slowed speed. 65 mm/s to 40mm/s
change filament to older stock.
clean nozzle, #1, #2 using
tested load new filament for 20-30sec. filament come out. but its not perfectly round, its spiral / wriggly.
still clicking and skipping infill and outline.
what seems to be the problem?
2014-09-02_16-21-21_375.jpg
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion