Results 1 to 10 of 47
Threaded View
-
08-23-2014, 02:27 AM #2
- Join Date
- Aug 2014
- Location
- Blantyre Uk
- Posts
- 5
Try increasing the build speed to 90mm/s extrude and 150mm/s travel
also heated bed is not required, and only causes more heat - heat is PLA's enemy
mounting a small fan to aid cooling the part as its printed will also help, PLA being of low density retains heat easily and needs help to get rid of it
these printers being makerbot copies are optimized for ABS, so you may get better results by using ABS, with these settings, but still increase the extrude and travel.
Keep it upLast edited by repman; 08-23-2014 at 02:41 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help