Results 1 to 10 of 33
Thread: Black ABS
Threaded View
-
08-11-2014, 05:46 AM #25
well that definitely sounds like the white I got with the printer. Maybe they keep the old stuff to ship with new printers :-)
Have't bought any white from anyone else yet.
Hell, still haven't tried the silver (actually grey - not at all what I was expecting) or black yet.
IT;'s such a pain to change filament I tend to just run the roll down.
It reverses the filament for a few cms and then just stops - the motor is still making running noises, but I have to pull the filament out with pliers.
I've had the extruder apart and I can't see why it needs so much force to remove it. Even with the springy tension lever open the filament does not just pull out without massive force.
That said - it feeds it in no problem and works great once loaded - it's just I'm concerned about how hard I Have to pullt it to remove it - don't want to break anything.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion