Results 1 to 10 of 25
Threaded View
-
11-11-2013, 08:16 PM #1
- Join Date
- Nov 2013
- Posts
- 9
Building an "Airtight" case with carbon filter.
So i have started work on a almost airtight case. The plan is to have 2 fans pulling a vacuum on the case and exhausting through a carbon filter.
I have the parts listed below on the way or in hand. My wife has recently become pregnant and I don't want to take any chances with stray fumes.
4x8 sheet of fine birch plywood.
http://www.amazon.com/dp/B0067D7DEA/ref … 25410_item - Carbon filter
http://www.amazon.com/dp/B0009JZSKO/ref … 25410_item - 80MM exhaust fans
http://www.amazon.com/dp/B000AYHZHM/ref … 25410_item - door hinge
http://www.amazon.com/dp/B0006N40CK/ref … 25410_item - flush mount handles
Now. While I await all of my parts I have some questions.
I have a QU-BD bed and 30A power supply inbound as well. I'll post more as I complete it.
2013-11-07 19.24.43.jpg2013-11-07 19.24.51.jpg2013-11-07 19.32.49.jpg2013-11-07 19.33.04.jpg2013-11-07 19.33.15.jpg
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion