Results 1 to 9 of 9
Thread: Creator X and Cura
Threaded View
-
07-17-2014, 09:38 PM #6
Cura was not meant for the Flashforge - it has USB and other connectivity for the Ultimaker, which the firmware that ships with it, was designed for.
We just have the option of utilising the Gcode and features it has and exporting to X3G and printing directly on the machine. I do not recommend using it's Gcode in repG or makerware as you will get errors, but the x3G format seems sound to copy to your SD and print.
http://wiki.ultimaker.com/Cura
There are probably alot of ones that will work with the Flashforge, you just need to find one that uses the Replicator 2x Dual firmware. I have been using Replicator G and Makerware forever, What one can't do, the other can and vice versa.Last edited by Geoff; 07-18-2014 at 12:49 AM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion