Results 1 to 10 of 96
Thread: Cobblebot 3D Printer
Threaded View
-
07-09-2014, 07:07 AM #1
Cobblebot 3D Printer
The Cobblebot 3D printer is here, and they are looking to raise $100,000 on crowdfunding site Kickstarter. The cobblebot printer features a huge build envelope of 15" all around. With a build envelope of this size you would expect to spend thousands of dollars for this machine. The Cobblebot however, is just $299 to those who back their campaign. Below you will find some of the more general specs of this 3D printer:
- Build Envelope: 15″ x 15″ x 15″
- Printer Speed: Current Max for High Quality prints – 150mm / sec; Absolute Max – 250mm / Sec
- Layer Height: 50-350 micron
- Printer Size: 24″ x 20″ x 20″
- Printer Weight: roughly 17 lb
- Materials supported: ABS, PLA, Nylon, Polycarbonate, Flexible Filament, LayWood, PVA, HDPE.
More details on this printer can be found here: http://3dprint.com/8597/cobblebot-3d-printer/ . Let us know if you have backed this printer!
Below is a picture of the printer's hot end nozzle.
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners