Results 1 to 10 of 757
Threaded View
-
06-29-2014, 11:21 AM #11
I don't understand why you say it is totally different? The M114 after the G28 is consistently reporting the nozzle to be at -.77 or so.
Right now... It looks like the code is behaving as it should. We need to understand things a little better.
Let's repeat the G28 and M114 with these changes:
#define Z_RAISE_BEFORE_HOMING 0 // (in mm) Raise Z before homing (G28) for Probe Clearance.
#define Z_RAISE_BEFORE_PROBING 0 //How much the extruder will be raised before traveling to the first probing point.
#define Z_RAISE_BETWEEN_PROBINGS 0 //How much the extruder will be raised when traveling from between next probing points
You should manually move the nozzle to a safe height after connecting before issuing the commands. This might help us understand where the strange values are coming from.Last edited by Roxy; 06-29-2014 at 11:32 AM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help