Results 1 to 10 of 16
Thread: Makerfarm & Z motor coupling
Threaded View
-
06-22-2014, 09:13 PM #14
Well, its not like the coupler flexes very much. But if it doesn't flex, the motor shaft and the Z-Threaded_Shaft have to be ---PERFECTLY--- aligned. And you never can do that. If you put that solid metal coupler in place, when you turn the Z Axis, you will feel spots that are very difficult to turn. And that is because the threaded rod has to bend because the coupler isn't flexing.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help