Results 1 to 6 of 6
Thread: PEI build plates
Threaded View
-
04-14-2024, 01:46 AM #4
- Join Date
- May 2020
- Posts
- 635
Did You adjust the 'Z' offset in the slicer or just the 'Z' height when setting the initial nozzle difference?
I should have made that clearer in my answer, now rectified.
From your description it sounds as if your nozzle was slightly too far away using the PEI sheet.Last edited by Bikeracer2020; 04-14-2024 at 01:51 AM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help