Results 1 to 10 of 24
Threaded View
-
06-11-2014, 12:04 PM #20
- Join Date
- Mar 2014
- Posts
- 94
I don't have a video to show since some glue attaching the solenoid to the object that goes up and down broke, but by testing some by hand not solenoid it appears that using a plastic sheet to act as a wall works. The surface waves formed on the dish soap (simulating the resin), which is sandwiched between the fresh and salt water, were massively reduced. I think with a proper setup they could be more or less eliminated.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion