Results 1 to 2 of 2
Thread: Filament issue?
Threaded View
-
01-29-2024, 12:23 PM #2
- Join Date
- May 2020
- Posts
- 626
If you are new to 3D printing perhaps try the standard 0.4mm nozzle initially.
I think that you are under extruding, jmo.
Basically you are trying to extrude a lot of molten plastic with a 1.00mm nozzle, can your hot end melt the required volume of filament quickly enough?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion