Results 1 to 9 of 9
Threaded View
-
01-09-2024, 08:22 PM #1
- Join Date
- Jan 2024
- Posts
- 16
First print on 'new' (used) Qidi x-cf pro. tips please!!
Here is my first go at 3dbency. It took quite a few level test prints to get PLA to stick at ALL. I ended up doing a -0.15 Z offset that seems to have got me going. However, even with that, it barely took any tweak at all, and it popped off. I feel that its too easy. I have a used textured baseplate. I'm afraid to give it any more negative z because I dont want to crash the nozzle. It seems the M6 ones are harder to find, and I ordered steel ones from qidi direct since I couldnt find any high temp ones on amazon at a M6.
ANyway, here is what he looks like:
20240109_195405.jpg20240109_195347.jpg
First layer is slowed to 10mm/s.
Temp 210, bed 60
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion