Results 1 to 2 of 2
Threaded View
-
11-28-2023, 02:45 PM #1
- Join Date
- Aug 2021
- Location
- Aubrey TX
- Posts
- 9
Top Layers are not completly covering infill
Problem: The top layers are not fully covering the infill below, as a result the final top surface is not smooth, and the infill shadow can be clearly seen. Suggestions appreciated.
Machine - Aquila
Slicer - Voxelab
Infill - 20% to 25%
Top Layers - 7
Layer thickness - .12
Filament - PLA
Hot end Temp - 195c
Bed Temp - 55c
Print Speed - 100mm/s Base Speed
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help