Results 1 to 4 of 4
Threaded View
-
09-10-2023, 02:15 PM #2
- Join Date
- May 2020
- Posts
- 627
From comments I've seen on this forum, Sketchup is a poor choice for producing STL files.
Plenty of free cad programs on the internet that work well for producing suitable printable files for 3D printing. Fusion 360 is very good but has perhaps a steeper learning curve than others.
Look on Youtube for the various programs available.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion