Results 1 to 4 of 4
Threaded View
-
05-26-2023, 03:37 PM #4
- Join Date
- May 2020
- Posts
- 626
You can always email Qidi and ask them.
I very rarely print anything other than ASA and I know the standard extruder set up does not like sustained temps above 240 because the teflon tube starts to char and deform at the end, well mine did anyway.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)