Results 1 to 2 of 2
Threaded View
-
05-16-2023, 02:52 PM #1
- Join Date
- Jul 2019
- Posts
- 15
Printer Halts at specific temp after pid tune
I can pid tune my hotend and it completes successfully. I enter the values with m301 command and then try to heat up my hotend and it halts due to temp error at 235 of 245 degrees. I can run the system cooler but need 245 for petg. This just started today after changing nozzle brands and do the pid tune. Previously ive run at 245 for hours on end.
Last edited by Gomja; 05-16-2023 at 02:52 PM. Reason: system specs
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help