Results 1 to 6 of 6
Threaded View
-
01-08-2023, 04:28 AM #4
- Join Date
- May 2022
- Posts
- 53
I had a trip, it was a raised paving stone that caused it.
Last edited by Bikeracer2020; 01-08-2023 at 04:43 AM. Reason: link check
I had a trip, it was a raised paving stone that caused it.
Last edited by Bikeracer2020; 01-08-2023 at 04:43 AM. Reason: link check
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion