Results 1 to 1 of 1
Threaded View
-
12-14-2022, 10:13 PM #1
- Join Date
- Dec 2022
- Posts
- 1
Extruder Issue Ender3 V2 With E3D Hemera Direct Drive Extruder
Been printing with the E3d Hemera for a few months now, and suddenly today been having the issue seen in the pictures below. Prints seem to start fine, then at a point they stop being fine. Also, the portion of the print that seems to be okay has terrible layer to layer adhesion. Filament is Overture brand PETG. Cooling fan is set to 30%, Hot end set to 247, and bed set to 90. Any help is appreciated.
20221214_182907.jpg20221214_182855.jpg20221214_182857.jpg20221214_182849.jpg
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion