Results 1 to 2 of 2
Thread: Tree support issue
Threaded View
-
10-23-2022, 07:52 PM #1
- Join Date
- Oct 2022
- Location
- Medford, Oregon
- Posts
- 1
Tree support issue
Hello. First time on the forum and fairly new to 3D printing. I started with an Ender 3 Pro. Bought the Anycubic Kobra Max a few months ago and started printing on it a couple of weeks ago. I'm having a couple of issues with the printer and hoping someone could offer some suggestions.
First issue and the biggest one:
I'm using tree supports and find that some areas of the tree supports are not printing. They have a stringy appearance. I have attached a photo of the issue. I am printing with Overture PETG. Suggested nozzle temp is 230-250 and hot bed temp 80-90. Printing at 240 and 85.
Second issue, which is more of a curiosity than anything:
With the Ender 3 Pro, it would print a line of filament on the left hand side of the build plate before moving to center and starting the print. I have since updated the Cura slicer to version 5.1.1 and now I do not see the starting line on the left of the build plate when printing on the Kobra Max. Is that a slicer setting or something to do with using?
Any help would be great. Thanks.Last edited by TB9652; 10-23-2022 at 08:10 PM.
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion