Results 1 to 10 of 255
Threaded View
-
05-31-2014, 02:30 PM #9
Thermistor Build
THERMISTOR BUILD
Cutting the small high temp sleeving tends to collapse the sleeving, making it hard to slip onto the thermistor wires. I found opening the cut end of the sleeving with a stick pin was helpful.
I ended up shortening the sleeving and thermistor leads for the hot end.Last edited by printbus; 08-10-2014 at 11:40 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion