Results 1 to 3 of 3
Threaded View
-
04-21-2022, 06:23 PM #1
- Join Date
- Apr 2022
- Posts
- 1
Is holding around 60 psi possible with 3d printing?
I need to 3d print a pressure regulator, the peak pressure it will reach will be around 58-60 psi, what material and infill should i use for this application? Any advice would be great,thank you for helping me!
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion