Results 1 to 3 of 3
Thread: Help with print settings for ASA
Threaded View
-
04-21-2022, 07:05 AM #1
- Join Date
- Apr 2022
- Posts
- 1
Help with print settings for ASA
Hello, I am trying to print with ASA for the first time and having problems getting the desired result. I'm using
- Dynamism ASA 2.85mm
- Ultimaker 3 (I don't have any type of enclosure)
- Latest version of Cura Using the CURA preconfigured "FINE" settings
- With the following changes
- Print Temp - 250f
- Bed Temp - 80f
- Print Speed - 40mm/s
- Cooling - Off
- Infill - 100%
- Also using Magigoo original
- Here is what I am trying to printDesired Result.jpg
- Print is not flat, it's warped upwards.IMG_4901.jpg
- The structure at the back of the print is misalignedIMG_4902.jpg
- Please help suggest what I should change in my settings.
Last edited by dudical26; 04-21-2022 at 07:15 AM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion