Results 1 to 2 of 2
Thread: Part won't stick without a raft
Threaded View
-
04-20-2022, 04:31 PM #1
- Join Date
- Apr 2022
- Posts
- 2
Part won't stick without a raft
Hi all, I do not seem to be able to get the filament to stick to the platform without using a raft. With a raft, the part prints fine. Without a raft, the extruded filament just "birdnests" at the nozzle because it is not sticking to the platform. My guess is the nozzle is not starting printing close enough to the platform, but again, it works fine when printing a raft. I have cleaned the platform with alcohol and it is quite clean. Thanks,
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help