Results 1 to 6 of 6
Threaded View
-
01-20-2022, 08:36 AM #1
Hictop controller MPK_V1 pinout mapping
The pin-out mapping is very similar to the Base v1.3 an MPX.3 they do not have a H6 connector
You may note : two ICSP ports on controller. H6 is a standard ICSP header, but for programming the ATmega 16U2
One of my projects is Finished
MPKv1.jpgLast edited by Roberts_Clif; 01-20-2022 at 03:21 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help