Results 1 to 10 of 10
Thread: Hollow print. Help.
Threaded View
-
01-02-2022, 04:36 AM #8
- Join Date
- Jun 2014
- Posts
- 885
I can't read the wall thickness in the posted image, but that might not be a concern. I see the layer thickness is 0.28 mm, which is very close to the maximum for a 0.4 mm nozzle. Have you tried a smaller layer thickness? Using a layer thickness of 0.2 mm is pretty common.
Consider also to try a different slicer. PrusaSlicer is quite capable, may have a profile for your printer, is free and easy to use and may shed some light on the problem.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion