Results 1 to 10 of 15
Threaded View
-
10-10-2021, 07:41 AM #11
to make a mould watertight - you need to print it solid. Now with most slicers 100% infill is NOT solid. usually you need to tick a box in the slicer that adds a solid diaphragm and set it to make one every layer. That will then make a totally solid, utterly watertight print that should work fine for a resin mould. Obviously you still need to get the printing temp and speed right as well. But you can certainly make watertight moulds.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help