Results 1 to 4 of 4
Thread: Settings for a vertical tube
Threaded View
-
09-17-2021, 04:30 PM #1
- Join Date
- Aug 2020
- Location
- Wyckoff NJ
- Posts
- 9
Settings for a vertical tube
I've tried endless combinations in Cura to get a clean print on an oval shaped tube standing upright. The walls have 4 layers total. I'm running and Ender 3 Pro with SKR Mini 2.0 and PETG. I've had some prints with clean outside but never clean inside. I tried slowing down, changing hot end temp, combing, retraction, surface mode, arc welder, etc. I'm at my wit's end. Any suggestions? Here is my project file.
https://drive.google.com/file/d/15d3...ew?usp=sharing
PXL_20210916_100049032.jpgLast edited by swisscheese; 09-17-2021 at 04:39 PM.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion