Results 1 to 10 of 17
Threaded View
-
07-02-2021, 10:54 AM #7
not bed level - z-axis OFFSET.
IE: how far above the bed you start printing.
Most slicers will let you adjust it.
So if i were you, I'd adjust it down (negative value) in increments of 0.05mm
Until it either sticks or the nozzle gets blocked 'cos it's too close to the bed :-)
From what I've seen recently - particularly angus talking about bed levelling with folded sheets of paper. People are obviously calibrating way too high above the bed.
Use a single thickness of unfolded printer paper.
Why anyone would fold it is beyond me :-)
Also consider buying a sheet of cheap self adhesive pei.
Soooo much better than pva glue.
https://www.ebay.com/itm/12476816529...wAAOSwmypgww3L
For the dehydrator - you'll need one with an adjustable thermostat.
The flying saucer ones will cook the filament and potentially let it change shape or even bond to itself.
Also pet-g doesn't like pva glue. That could be your problem maybe.Last edited by curious aardvark; 07-02-2021 at 10:59 AM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help