Results 1 to 7 of 7
Threaded View
-
04-30-2021, 12:22 AM #1
- Join Date
- Apr 2021
- Posts
- 2
Look at my print and tell me what's wrong :)
Printed on Ender 5 Pro, with PLA at 200 degrees. Retraction at 5mm, layer-heigh 2.8.The print has a flat base of 5mm, and then the two sides go up for about 25cm, slanting backwards. Printed standing on its base.The print is overall ok, but 2 flaws:- The top-layer of the base has some random potmarks in it (There are 6 proper holes, designed to be there)- The first couple of centimeters of the sides don't have solid walls. But above that, they are suddenly fine.
Printer will print perfect...
Today, 09:40 AM in Tips, Tricks and Tech Help