X axis print issue

[luke.kiebert]

Hi,

I am new to this forum.
I have a Mankati XT printer and have run into a problem. As pictured, the y axis printed fine but the x axis did not print properly. I have not had an
issue with small centered prints. This print attempt is 195*195*60mm. I have stopped the print at 70%.

Printing - z res- 0.1mm @ 50mm/s
- Base Layer res 0.3mm @ 10mm/s
- 100% fill
- shell thickness 1mm
- Print Temp -210deg
-Bed Temp -40deg
-Material - PLA

Any suggestions?

IMG_4801.jpgIMG_4800.jpg

Luke