Results 1 to 4 of 4
Threaded View
-
03-30-2021, 03:13 PM #1
- Join Date
- Mar 2021
- Posts
- 62
PrusaSlicer 2.3 settings for Ender 5 plus.
Hi.Please I have a problem with the lower layers of the printout and I don't know how to set up PrusaSlicer 2.3 correctly. Chip 0.4 does not place individual fibers next to each other but with a gap. The filament is PLA, the nozzle temperature is 220 ° C and the table temperature 55 ° C.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion