Results 1 to 3 of 3
Thread: First layer warping issue
Threaded View
-
03-22-2021, 01:26 PM #2
first off - pla works best with a heated printbed, anyone who tells you otherwise is an idiot :-)
65c work best.
Second: what slicer are you using ?
And how do you calibrate the printbed ?
Ie: properly by hand or with a topographical sensor ?
And, no you shouldn't need supports on that bowl.
Your extrusion temp is fine, just looks like you're printing the first layer too far away from the bed.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion