Results 1 to 10 of 15
Thread: Calibration question
Threaded View
-
02-12-2021, 09:38 AM #6
Calibration measures
So I followed Option B above
X130.51 mm vs 130
Y
109.4 vs 110
Z
39.75 vs 40
So they are all pretty good.
In my opening post, I measured in X a difference of 0.34 mm over 30mm, so 1.13 % deviation
My X calibration measures above deviate by 0.51 over 130mm which is 0.4% only.
Maybe something else is not right ?
Belts are tight, i cannot move the print head in any direction when printer is on.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help