Results 1 to 10 of 13
Threaded View
-
05-08-2014, 02:08 PM #11The first uses a two stage process. First stage is to print a clay made up almost but not entirely of metal particles. You use a paste extruder, such as this one from thingiverse, loaded with a metallic clay such as this (which evidently sees a lot of use by jewelry makers). Second stage is to fire the piece in a kiln. You end up with a metal piece.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)