Results 1 to 6 of 6
Threaded View
-
02-02-2021, 09:08 AM #1
- Join Date
- Feb 2021
- Posts
- 4
Help needed with getting good print quality
Hi all,
I have been trying out multiple solutions with my printer to get better quality, but I seem to not be able to do it by myself. So now I'm here for some help.
My printer is a modded Anet A8 with a Titan extruder, a brass V6 heater block, a brass T-V6 nozzle and a glass bed, enclosed in an IKEA lack enclosure . I use Cura as my slicer and print with AzureFilm PETG 1.75mm.
I have not printed anything since the start of 2020, but had to print some stuff for a project I'm currently working on. All was printing fine before with the same settings, but now I am getting horrible printing quality (see [https://imgur.com/a/EU0MqnS](https:/...com/a/EU0MqnS)).
Solutions I tried include:
* Drying my current filament
* Using new filament
* Increasing/decreasing print speeds
* Increasing flow rate
* Printing temperatures from 210°C-240°C
* Build plate temperatures from 45°C-85°C
Does anyone have any idea what the problem could be? If you need more information, don't be afraid to ask. Thanks in advance!Last edited by Glivmo; 02-04-2021 at 04:14 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help