Results 1 to 5 of 5
Threaded View
-
01-21-2021, 06:10 AM #1
- Join Date
- Jan 2021
- Posts
- 3
SKR 1.3 UART not working with TMC2208 v3.0
I think i went through every online guide at this point and even used someone elses firmware for the same set up as i have and its still not working when it does for them. i removed all the jumpers exept for the one for the power to the beaord and then i placed th 4 jumpers to the UART pins for each axis, sending m122 gives me error : ALL LOW for each axis. i thought that with2208 v3.0 i dont need to do any mods but given i used firmware that work for someone else i erally dont know what to do anymore. :'(
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion