Results 1 to 2 of 2
Threaded View
-
11-19-2020, 05:04 PM #2
- Join Date
- May 2018
- Posts
- 567
it is all relative to the machine, nozzle and the material.. it is a science experiment. There is a setting for filament diameter which should be measured and average actual size input to the slicer.. I have a very different machine than you do, most filaments need 92-93 with mine.. so do what works best for you. I think in one slicer the default filament size is not 1.75 so you may want to make sure that is set right.. good luck
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help